全自动配电箱箱体冷弯成型机组

二次配电网络是由配电变压器次级引出线到用户入户线之间的线路、元件所组成的系统，又称低压配电网络。接线方式除放射式和环式外，城市的重要用户可用双回线接线。用电负荷密度高的市区则采用网格式接线。这种网络由多条一次配电干线供电，通过配电变压器降压后，经低压熔断器与二次配电网相连。由于二次系统中相邻的配电变电器初级接到不同的一次配电干线，可避免因一次配电线故障而导致市中心区停电。
潍坊奥腾冷弯机械配电箱箱体冷弯成型设备概述和设计原则：
设备概述：
本机组为配电箱箱体的上料、校平、自动送料、在线冲孔、冷弯成型、框体折弯一次自动完成自动化设备，具有生产效率高、孔距准确、自动化程度高等特点。
设计原则：
此设计本着节省投资，减少工位，使用可靠，便于维护，零部件力争标准化、通用化、使用寿命正常化，关键部位高标准，辅助部位保使用，轧辊易互换、基准统一化的原则，让客户买的放心，用着舒心。
Introduction and design principles of cold forming equipment for distribution box of Weifang OTeng cold forming chine:

Overview of equipment:

This unit is the autotic equipment for feeding, leveling, autotic feeding, on-line punching, cold forming and frame bending for the distribution box. It has the characteristi of high production efficiency, accurate hole cing and high autotion degree.

Design principles:

This design is based on the principles of sing investment, reducing work position, using reliably, easy to intain, standardization of parts and components, norlization of service life, high standard of key parts, intenance of auxiliary parts, easy exchange of rolls and unification of datum. Let the customer buy rest assured, with comfortable.
配电（power distribution）是在电力系统中直接与用户相连并向用户分配电能的环节。配电系统由配电变电所、高压配电线路、配电变压器、低压配电线路以及相应的控制保护设备组成。
配电箱箱体一次成型设备是我司自2015年来重点制造的新型设备。以下是我司简介：
潍坊奥腾冷弯机械有限公司成立于2003年，引鉴意大利赛克公司冷弯成型技术，是一家专业致力于薄板冷弯成型设备的研发、设计、制造的高新技术企业。
? 公司拥有现代化生产厂房余平方米，办公楼3000平方米，工程师6名，专业工程师10名，具备完成各类冷弯设备及与之配套的液压、数控电气的设计、制造能力，公司多年来一直从事冷弯设备的开发、设计、制造，设计理念**，制造经验丰富，零部件力争标准化、通用化，关键部位高标准，辅助部位保使用，公司产品以效率高、稳定性好，操作、维修方便、性**等诸优势，赢得客户信赖。截止目前公司已拥有17项专利，其中薄板变形波纹处理技术在**业处于地位。
Distribution box molding equipment is a new type of equipment that our company has de since 2015. The following is a brief introduction to our company

WeiFang Aoteng Cold Bending chine Co . , Ltd . was founded in 2003 . It is a high - tech enterprise specializing in R & D , design and nufacture of cold - bending equipment for thin plate .

The company has more than square meters of modern production plant, 3000 square meters of office building, 6 senior engineers and 10 professional engineers. It has the ability to design and nufacture independently all kinds of cold bending equipment and its corresponding hydraulic and numerical control electrical equipment. The company has been engaged in the development, design, nufacture and design of cold bending equipment for ny years, advanced nufacturing concept, rich nufacturing experience, parts and components strive to standardize, generalize, key parts of high standards, auxiliary parts to protect the use of, the company's products with high efficiency, Good stability, operation, easy intenance, high price and other advantages to win customer trust. So far, the company has 17 countries Patent, one of the thin plate defortion corrugation treatment technology in the same industry in the leading position.
配电线路按结构有架空线路和地下电缆。农村和中小城市可用架空线路，大城市（特别是市中心区）、旅游区、居民小区等应采用地下电缆。

-/gjeijh/-