潍坊配电箱壳体加工机组 奥腾冷弯

配电系统中常用的交流供电方式有：
①三相三线制。分为三角形接线（0.4kv电动机和照明）和星形接线（用于低压三相0.23kv工业照明配电以及0.23kv三相电动机）。
②三相四线制。用于0.4kv/0.23kv低压动力与照明混合配电 。
③三相二线一地制。多用于农村配电（因为安全问题早已淘汰）。
④单相单线制27.5kv。常用于电气铁路牵引供电。
⑤单相二线制0.23kv(由三相四线制获得)。主要供应居民用电。
潍坊奥腾冷弯机械有限公司制造的配电箱箱体冷弯成型设备拥有一套科学合理的自动化控制系统，程序设定不复杂，操作方面易上手，我们的电控系统：
由系统由5.5KW变频器、PLC控制系统、操作台等组成。该系统用于完成整个机组的电气控制，控制柜上装有故障保护装置，如整个机组任何一个控制开关出现故障，整个机组会自动停止动作。
Weifang OTeng cold bending chinery co., Ltd. Has a set of scientific and reasonable autotic control system for the distribution box. The program is not complicated, and the operation is easy to use. Our electric control system is as follows:

By the system by 5.5 KW inverter PLC control system, operating platform and so on. The system is used to complete the electrical control of the whole unit. The control cabinet is equipped with a fault protection device. If any control switch of the whole unit fails, the whole unit will stop autotically.

配电箱箱体一次成型设备也是对我们设备的一种描述，因为传统的配电箱箱体加工制造都是先去下料（裁料），再转到打孔工艺，然后用折弯机折出箱体来，工序烦琐不说，人工成本也不低。作为一个老板来说，有**高效的生产设备为什么不选择呢？
潍坊奥腾冷弯机械有限公司精心制造的全自动配电箱箱体一次成型设备仅需要一名工人，单班产量可生产600-1000个（根据箱体大小，产量不一样）；设备易损件少，维护频率低，是目前箱体加工设备里性价比**高的！
Distribution box once forming equipment is also a deion of our equipment, because the traditional distribution box processing and nufacturing is to go to the first terial (cut), then to the drilling process, and then use a bending chine to fold out the box, the process is cumbersome not to say, The cost of labor is not low. As a boss, why not choose advanced and efficient production equipment?

Weifang Auteng Cold bending chinery Co., Ltd., the autotic distribution box body molding equipment de meticulously need only one worker, the single shift output can produce 600-1000 units (according to the size of the box, the output is different), the equipment has less easily daged parts and low intenance frequency, Is the current box processing equipment in the perfornce-to-price ratio of a super-high!
配电系统由配电变电所（通常是将电网的输电电压降为配电电压）、高压配电线路（即1千伏以上电压）、配电变压器、低压配电线路（1千伏以下电压）以及相应的控制保护设备组成。配电电压通常有35～60千伏和3～10千伏等。
潍坊奥腾冷弯机械有限公司制造的配电箱箱体冷弯成型设备先当于一条完整的流水线，其中料架机构参数为：
单头悬臂开卷机：
(1) 负重：≤5T;
(2) 开卷内径范围：450~500 mm；
(3) 开卷外径：ф0 mm；
(4) 开卷宽度：≤500 mm。
(5)四连杆涨紧，手调磨擦轮制动，防止带钢过多松脱，且**轧机拖动带钢阻力小。
以上是设备标配配置，如客户需要自动化程度更高的，如带有液压涨紧功能和启动压料功能，我们也有高配的可供选择！
The cold forming equipment of the distribution box de by Weifang OTeng Cold bending chinery Co., Ltd. is first used in a complete assembly line, in which the terial frame mechani parameters are:

Single head cantilever unwinding chine:

(1) ximum load: ≤ 5T;

(2) the inner diameter of the unwinding is in the range of: 450 / 500 mm;

(3) ximum open-roll diameter: 0 mm;

(4) ximum unwinding width: ≤ 500mm.

(5) Four-bar tension, nual friction wheel brake to prevent excessive strip loose, and to ensure that the rolling mill drag strip resistance minimum.

The above is the standard equipment configuration, such as customers need a higher degree of autotion, such as with hydraulic tightening function and start pressing function, we also he high tching options!
高低压配电工程顾名思义就是接高压配电柜、低压开关柜和以及连接线缆的配电设备。一般供电局、变电所都是用高压配电柜，然后经变压器降压再到低压开关柜，低压开关柜再到各个用电的配电盘。控制箱、开关箱里面无非就是把一些开关、断路器、熔断器、按钮、指示灯、仪表、电线之类保护器件组装成一体的配电设备。

-/gjeijh/-