郑州新型立体车库边梁全自动冷弯成型机 边梁生产线

边梁数控冲床的伺服送料结构采用五加四传动机构，送料尺寸精确，启停动作迅速，确保送料质量和技术要求。

边梁冷弯成型机机身及牌坊组件：
边梁冷弯成型机机身部分是本轧机的主体，其余组成部分均装在本机身上，为钢板焊接结构，焊接完成后均去应力处理。各连接面、安装面精加工且安装面加工有定位键槽，定位精确，安装方便，**各组轧机主轴之间的平行度及与轧制中心线的垂直度。
牌坊组件是本机的主要工作部分，共有20架，自前至后依次安装固定在机身上。本组件主要由前后牌坊架、上下主轴、上横梁、上轴升降调节丝杆、前后轴承支座及主轴轴承等组成。后牌坊架固定在机身上，是上下主轴的支持基准；前牌坊可拆卸，方便更换装配轧辊。上下主轴通过轴承安装在轴承支座上，轴承支座可沿牌坊窗口的导向面通过调节丝杆带动调节上下轴间的距离以适用不同直径轧辊的安装。
Side beam cold forming machine fuselage and archway assembly:


The fuselage part of the side beam cold forming machine is the main part of the rolling mill, and the other parts are all mounted on the machine, which is the welded structure of the steel plate, and the stress is removed after welding. Each connecting surface, installation surface is finely machined and the installation surface is machined with positioning keyway, which is accurate in location, convenient in installation, and ensures the parallelism between the main shaft of each group of rolling mill and the perpendicularity with the center line of the rolling mill.


Archway assembly is the main part of the machine, a total of 20, from the front to the back of the installation on the fuselage. This assembly mainly consists of front and rear archways, upper and lower spindle, upper cross beam, upper shaft lifting adjusting wire rod, front and rear bearing support and main shaft bearing, etc. The rear arch frame is fixed on the fuselage and is the support benchmark for the upper and lower spindle. The front arch can be disassembled to facilitate the replacement of assembly rolls. The upper and lower spindle is mounted on the bearing support through the bearing. The bearing support can adjust the distance between the upper and lower shafts by adjusting the wire rod along the guide surface of the archway window to suit the installation of the roller with different diameters.

潍坊奥腾冷弯机械有限公司制造的立体车库边梁冷弯成型设备具有在线打孔、冷弯成型、切断功能，实现了边梁型材的自动化高效生产。自立体车库行业在国内进入快速发展时期，我公司就投入精力研发制造车库边梁冷弯成型设备，经过不断的工艺改进，目前已将设备使用过程中存在的问题进行了改进升级，使得设备的功能以及操作性不断获得提升。目前国内在用的车库边梁冷弯成型设备绝大部分产自我公司，因优越的性能，过硬的产品质量，完善的售后服务使得我们的设备口口相传，为了越来越多的车库企业降低了加工成本。
The cold forming equipment of the edge beam of the three-dimensional garage made by Weifang OTeng Cold bending Machinery Co., Ltd. has the functions of online drilling, cold forming and cutting, and realizes the automatic and efficient production of the edge beam profile. Since the stereoscopic garage has entered the period of rapid development in China, our company has invested in the R & D and manufacturing of the cold bending forming equipment for the side beam of the garage. After continuous technological improvement, the problems existing in the process of using the equipment have been improved and upgraded. The function and operation of the equipment are improved continuously. At present, most of the cold bending equipment used in domestic garage side beam is produced in our company, because of its superior performance, excellent product quality and perfect sale After-service makes our equipment word of mouth, for more and more garage enterprises to reduce the processing cost.

边梁冷弯成型设备制造质量控制情况
根据客户的要求，结合我公司生产部、质检科实际情况，对于设备的生产管理、质量控制情况，作出以下介绍：
1、生产管理：
由生产经理统筹规划，携2名生产计划调度员，合理安排各工序工作，**加工车间、装配车间、质检科等各相关科室的工作顺利进行，已使所有工序零部件质量达到贵司产品质量要求。
2、质量控制：
⑴、设备外观：
①、设备整体表面整洁，油漆喷涂均匀完整，不流淌、无漏喷。轧辊表面、各导轨面、滑动面、滚动面及图纸有要求的位置不能喷漆。
②、未喷漆部位涂防锈油，轧辊模具等重要部件无磕碰划伤现象。
③、整机外漏部件除刃口外都作倒角、倒愣处理，去除尖角毛刺。
④、整机各焊接及装配固定组件**其与相关部件的相对位置合理、准确。
⑵产品精度：
①、标准轧机的牌楼固定螺栓、横梁固定螺栓、轧辊轴锁紧螺母、基准锁紧螺母、轴承盖紧固螺栓等一定要紧固到位，轧辊轴与轧辊基准线要垂直，允差0.2~0.3/1000,不可累积。
②、安装校直架时要**其中心与轧辊基准中心对正，**左右调整间隙能满足型材弯曲的调整及多种规格型材的共用。
Manufacturing quality Control of Cold forming equipment for side Beam


According to the requirements of our customers, combined with the actual situation of our production department and quality inspection department, we will introduce the production management and quality control of the equipment.


1. Production management:


By the production manager overall planning, with 2 production planning dispatchers, reasonable arrangement of each process work, to ensure the processing workshop, assembly workshop, quality inspection department and other relevant departments work smoothly, Has made all the process parts quality up to your product quality requirements.


2. Quality control:


1. Device appearance:


1, the overall surface of the equipment clean, paint spray uniform integrity, no flow, no leakage spray. Roll surface, guide surface, slide surface, rolling surface and drawing must not be sprayed.


2. The anti rust oil is not painted at the painting part, and the important parts such as the roll die and so on are not scratched.


3. The external leakage parts of the whole machine are all chamfered except the cutting edge, so as to remove the burr of the sharp angle.


4. The relative position of welding and assembling fixed components is reasonable and accurate.


2 Product precision:


1. The fixed bolt of the standard rolling mill, the fixed bolt of the transverse beam, the lock nut of the roller shaft, the base lock nut, the fastening bolt of the bearing cover must be fastened in place, the roll shaft and the roller datum line should be vertical, and the allowance is 0.2~0.3/1000, not to be accumulated.


2. When installing the straightening frame, it is necessary to ensure the alignment between the center and the roller reference center, and to ensure that the left and right adjustment clearance can meet the profile bending adjustment and the sharing of many kinds of profiles.

-/gjeijh/-