新研制开发气动冲床效率更高，稳定性更好且大大降低生产成本和维修费用。
边梁冷弯成型机机身及牌坊组件：
边梁冷弯成型机机身部分是本轧机的主体，其余组成部分均装在本机身上，为钢板焊接结构，焊接完成后均去应力处理。各连接面、安装面精加工且安装面加工有定位键槽，定位精确，安装方便，保证各组轧机主轴之间的平行度及与轧制中心线的垂直度。
牌坊组件是本机的主要工作部分，共有20架，自前至后依次安装固定在机身上。本组件主要由前后牌坊架、上下主轴、上横梁、上轴升降调节丝杆、前后轴承支座及主轴轴承等组成。后牌坊架固定在机身上，是上下主轴的支持基准；前牌坊可拆卸，方便更换装配轧辊。上下主轴通过轴承安装在轴承支座上，轴承支座可沿牌坊窗口的导向面通过调节丝杆带动调节上下轴间的距离以适用不同直径轧辊的安装。
Side beam cold forming machine fuselage and archway assembly:
The fuselage part of the side beam cold forming machine is the main part of the rolling mill, and the other parts are all mounted on the machine, which is the welded structure of the steel plate, and the stress is removed after welding. Each connecting surface, installation surface is finely machined and the installation surface is machined with positioning keyway, which is accurate in location, convenient in installation, and ensures the parallelism between the main shaft of each group of rolling mill and the perpendicularity with the center line of the rolling mill.
Archway assembly is the main part of the machine, a total of 20, from the front to the back of the installation on the fuselage. This assembly mainly consists of front and rear archways, upper and lower spindle, upper cross beam, upper shaft lifting adjusting wire rod, front and rear bearing support and main shaft bearing, etc. The rear arch frame is fixed on the fuselage and is the support benchmark for the upper and lower spindle. The front arch can be disassembled to facilitate the replacement of assembly rolls. The upper and lower spindle is mounted on the bearing support through the bearing. The bearing support can adjust the distance between the upper and lower shafts by adjusting the wire rod along the guide surface of the archway window to suit the installation of the roller with different diameters.
改进型气动冲床，工作效率更高，工况产品更稳定，大大降低了设备运行成本。
-/gjeijh/-
http://aotengjixie.cn.b2b168.com
