边梁数控冲床的伺服送料结构采用五加四传动机构，送料尺寸精确，启停动作迅速，确保送料质量和技术要求。
潍坊奥腾冷弯机械有限公司制造的边梁冷弯生产线在全国立体泊车领域，同泊车行业国内**品牌--潍坊大洋、深圳伟创、巨人控股、鑫华源、杭州西子等形成了良好的合作关系；并且通过努力，截止目前合作的客户达近百家。高质量的产品配以完善的售后服务，让我们的设备获得了市场越来越多的认可！
The side beam cold bending production line produced by Weifang oten Cold Bending Machinery Co., Ltd. has formed a good cooperative relationship with the famous brands in the country, such as Weifang ocean, Shenzhen Wei Chuang, giant holding, Beijing Xin Hua source, Hangzhou West son and so on. The volume of products with perfect after-sales service, so that our equipment has gained more and more recognition in the market.
边梁冷弯成型机主要参数：
（1）20道主辊， 1套校直装置，1组导向装置；
（2）过料宽度：500 mm；
（3）轧制厚度：3～4mm（可定制）；
（4）轧制速度：0~4米/min可调；
（5）主轴直径ф100mm；
（6）驱动电机功率：18.5KWx2
（7）机组组成：由：机身、牌坊组件、导向装置、校直装置、传动系统组成。
Main parameters of side beam cold forming machine:
(1) 20 main rollers, 1 set of straightening devices and 1 set of guiding devices;
(2) the maximum overloading width of 1: 500 mm;
(3) the rolling thickness is 3mm and 4mm(customizable);
(4) the rolling speed can be adjusted from 0 to 4 m / min;
(5) Spindle diameter of 100 mm;
(6) Drive motor power: 18.5KWx2
(7) Unit composition: by: fuselage, archway assembly, guide device, straightening device, transmission system.
边梁冷弯成型机机身及牌坊组件：
边梁冷弯成型机机身部分是本轧机的主体，其余组成部分均装在本机身上，为钢板焊接结构，焊接完成后均去应力处理。各连接面、安装面精加工且安装面加工有定位键槽，定位精确，安装方便，保证各组轧机主轴之间的平行度及与轧制中心线的垂直度。
牌坊组件是本机的主要工作部分，共有20架，自前至后依次安装固定在机身上。本组件主要由前后牌坊架、上下主轴、上横梁、上轴升降调节丝杆、前后轴承支座及主轴轴承等组成。后牌坊架固定在机身上，是上下主轴的支持基准；前牌坊可拆卸，方便更换装配轧辊。上下主轴通过轴承安装在轴承支座上，轴承支座可沿牌坊窗口的导向面通过调节丝杆带动调节上下轴间的距离以适用不同直径轧辊的安装。
Side beam cold forming machine fuselage and archway assembly:
The fuselage part of the side beam cold forming machine is the main part of the rolling mill, and the other parts are all mounted on the machine, which is the welded structure of the steel plate, and the stress is removed after welding. Each connecting surface, installation surface is finely machined and the installation surface is machined with positioning keyway, which is accurate in location, convenient in installation, and ensures the parallelism between the main shaft of each group of rolling mill and the perpendicularity with the center line of the rolling mill.
Archway assembly is the main part of the machine, a total of 20, from the front to the back of the installation on the fuselage. This assembly mainly consists of front and rear archways, upper and lower spindle, upper cross beam, upper shaft lifting adjusting wire rod, front and rear bearing support and main shaft bearing, etc. The rear arch frame is fixed on the fuselage and is the support benchmark for the upper and lower spindle. The front arch can be disassembled to facilitate the replacement of assembly rolls. The upper and lower spindle is mounted on the bearing support through the bearing. The bearing support can adjust the distance between the upper and lower shafts by adjusting the wire rod along the guide surface of the archway window to suit the installation of the roller with different diameters.
-/gjeijh/-
http://aotengjixie.cn.b2b168.com
