配电箱箱体冷弯成型设备工艺流程：
上料(将带钢放置在开卷机上) —板料校平送料（此处是校平送料机，带动力）—伺服送料液压冲孔（有伺服系统控制尺寸精度，实现打孔、切角功能）—冷弯成型（主机部分，实现翻边折弯）—成型后折弯（折成框体）—液压自动切断—卸料。
设备结构部分说明：
1.我们的配电箱箱体冷弯成型设备有两种结构可选择，双悬臂结构可任意调节板型宽度，调整方便快速，一台设备可生产多种电箱产品，适应性强；龙门式结构通过调整隔套也可实现多种电箱产品的生产，性价比高。
2.伺服送料液压冲孔装置可依据客户需求定制冲头形式和数量，冲孔精度稳定可靠；
3.成型后自动折弯机构可实现不停机折弯，连续工作，配合自动液压切断，操作人员仅需一人卸料即可；
技术参数：
1.生产速度：每分钟2个左右。
2.宽度、高度、深度可以实现调节生产。
3.轧制厚度：0.8-1.2mm（可定制）。
4.折弯处对接缝隙≤1mm。
Feeding (placing strip steel on uncoiling chine)-plate leveling and feeding (this is leveling feeder, belt power)-servo feed hydraulic punching (servo system controls dimensional accuracy to achieve perforation, Angle function)-cold forming (in part, flanging and bending)-after forming (frame)-hydraulic autotic cutting-unloading.
Equipment structure section deion:
1. Our distribution box cold forming equipment has two kinds of structure to choose, the double cantilever structure can arbitrarily adjust the plate width, the adjustment is convenient and fast, one equipment can produce ny kinds of electric box products, the adaptability is strong; The gantry type structure can also realize the production of ny kinds of electric box products by adjusting the cer sleeve, with high perfornce and price ratio.
2. Servo feed hydraulic punching device can customize the form and quantity of punch according to customer's dend, and the punching precision is stable and reliable.
3. After forming the autotic bending mechani can achieve no stop bending, continuous work, with autotic hydraulic cutting, the operator only need one person to unload the terial;
Technical parameters:
1. Production rate: about 2 per minute.
2. Width, height and depth can be adjusted for production.
3. Rolling thickness: 0.8-1.2 mm (customizable).
4. The joint gap at the bend is less than 1 mm.
潍坊奥腾冷弯机械有限公司配电箱箱体冷弯成型设备主机结构及部分参数：
冷弯成型机：
（1）16道主辊， 1套导向装置 （主机结构采用一侧固定，另一侧整体调整，更换箱体厚度尺寸时，只需人工按照尺寸刻度尺旋转手轮至合适位置即可）；
（2）过料宽度：400 mm；
（3）轧制厚度：0.8-1.2min；（可定制）
（5）主轴直径ф55mm；
（6）主电机功率：5.5KW；
（7）冷弯成型机组成：该机是整个机组的主要工作部分。带钢经过连续的滚轧变形，即成为符合图纸要求的型材，本机由：机身、墙板组件、导向装置、校直装置、传动系统组成。
The in structure and some parameters of the cold forming equipment for the distribution box of Weifang OTeng cold bending chinery co., Ltd.
Cold forming chine:
(1) 16 in rollers and 1 guide device (the in structure is fixed on one side, the other side moves and adjusts as a whole, and when changing the thickness dimensions of the box, the handwheel can be nually rotated to the appropriate position according to the dimension scale);
( 2 ) ximum terial width : 400 mm ;
(3) rolling thickness: 0.8-1.2min; (customizable)
(5) Spindle diameter of 55 mm;
(6) in motor power: 5.5KW;
(7) composition of cold forming chine: this chine is the in working part of the whole unit. After continuous rolling and defortion, the strip becomes the profile that meets the drawing requirements. The chine consists of: fuselage, wall panel assembly, guide device, straightening device, tranission system.
一次配电网络是从配电变电所引出线到配电变电所（或配电所）入口之间的网络。在中国又称高压配电网络。电压通常为6～10千伏 ，城市多使用10千伏配电。随着城市负荷密度加大，已开始采用20千伏配电方案。由配电变电所引出的一次配电线路的主干部分称为干线。由干线分出的部分称为支线。支线上接有配电变压器。一次配电网络的接线方式有放射式与环式两种。
潍坊奥腾冷弯机械有限公司制造的配电箱箱体冷弯成型设备拥有一套科学合理的自动化控制系统，程序设定不复杂，操作方面易上手，我们的电控系统：
由系统由5.5KW变频器、PLC控制系统、操作台等组成。该系统用于完成整个机组的电气控制，控制柜上装有故障保护装置，如整个机组任何一个控制开关出现故障，整个机组会自动停止动作。
Weifang OTeng cold bending chinery co., Ltd. Has a set of scientific and reasonable autotic control system for the distribution box. The program is not complicated, and the operation is easy to use. Our electric control system is as follows:
By the system by 5.5 KW inverter PLC control system, operating platform and so on. The system is used to complete the electrical control of the whole unit. The control cabinet is equipped with a fault protection device. If any control switch of the whole unit fails, the whole unit will stop autotically.
-/gjeijh/-
http://aotengjixie.cn.b2b168.com
